国际技术转让加设备进口合同
10-15 21:07:03
来源:http://www.qz26.com 技术合同 阅读:8498次
导读:other words and expressions shall have the meanings ascribedtothemin article 1 (definitions)of the agreement.2.licensing conditionsthe supplier shall, save as hereinafter provided, grant to the buyer anon-exclusive, non-transferable right and licence, withouttherighttosub-license, under the patent rights and the process information:(1)to use process a in the process a unit, and(2)to use and sell the products produced by the processaunit[incountry (ies)]/[i
国际技术转让加设备进口合同,标签:技术开发合同,技术咨询合同,http://www.qz26.com
other words and expressions shall have the meanings ascribedtothemin article 1 (definitions)of the agreement.
2.licensing conditions
the supplier shall, save as hereinafter provided, grant to the buyer anon-exclusive, non-transferable right and licence, withouttherighttosub-license, under the patent rights and the process information:
(1)to use process a in the process a unit, and
(2)to use and sell the products produced by the processaunit[incountry (ies)]/[inanycountryoftheworldexceptthecountryorcountries set out below:]
3.paid up licence and additional licence fees
the paid up licence fees payablepursuanttoarticle12(contractprice and technical service fee)of the agreement andtheappendicestothe agreement apply to the process a unit operating at itsstateddesigncapacity. if the design capacity is in any way increased or if the processa unit is in any way operated in excess of its designcapacitythenthebuyer shall pay to the supplieradditionallicencefeescalculatedinaccordance with the following formula:(calculation formula)
4.improvements and grant-back
4.1subject to paragraph 3 above, and wheredulyauthorizedbytheprocess licensor, the supplier shall:
(1)from time to time, and to the extent that the supplier is entitledto disclosethesame,providethebuyerwithtechnicalinformationrelating to improvements in process a, whetherornotpatentable,madeavailable to the supplier by the process licensor to the extent thatsuchinformation is useful for the operation of the process a unit; and
(2)grant to the buyer a licence mentioned in (1)aboveinthesameterms as contained in paragraph 2 above.
such licence shall where permitted by the processlicensor,bemadeavailable without additionalpayment,unlessandtotheextentthatparagraph 3 above applies. the supplier's obligation under thisparagraphshall terminate on the cut-off date.
4.2the buyer shall:
(1)from time to time provide the supplier with technicalinformationrelating to any inventions, improvements and/or developments madebythebuyer in connection with thedesign,operationormaintenanceoftheprocess a unit;
(2)granttothesuppliertheroyalty-free,non-exclusive(non-transferable)right and licence to use the technical information disclosedunder paragraph 4.2 (1)in process a, and to practice any patentsgrantedin respect of any such information in process a, and to use andselltheproducts produced by process a. the saidrightsandlicencesshallbeextended to the process licensor and the licensees of the process licensorand of the supplier for use in process a. thebuyer'sobligationsunderthis paragraph shall terminate on the cut-off date.
5.patent indemnity
notwithstanding article 29 (patent indemnity)and subjecttoarticle30 (limitation of liability)of the agreement the supplier's liability forindemnification pursuant to article 29 (patent indemnity)of the agreementarising in connection with the licence hereby granted shall be limitedto_________ per cent of the paid up licence fee specified in the appendix 1(breakdown of contract price)to the agreement. thesupplier'sliabilityfor indemnification under this paragraph shall terminateonthecut-offdate.
the buyer shall be responsible for andpayanydamages,claimsordemands (including legal and otherprofessionalfeesandexpenses) inexcess of the limit specified above.
6.special conditions for termination
6.1if the contract is terminated by eitherparty,thenunlesstheparties agree otherwise, the rights and obligations of the buyerandthesupplier in respect of licences for process agrantedpursuanttothisappendix 6 shall be terminated, except thoseprovidedinparagraph6.2below.
other words and expressions shall have the meanings ascribedtothemin article 1 (definitions)of the agreement.
2.licensing conditions
the supplier shall, save as hereinafter provided, grant to the buyer anon-exclusive, non-transferable right and licence, withouttherighttosub-license, under the patent rights and the process information:
(1)to use process a in the process a unit, and
(2)to use and sell the products produced by the processaunit[incountry (ies)]/[inanycountryoftheworldexceptthecountryorcountries set out below:]
3.paid up licence and additional licence fees
the paid up licence fees payablepursuanttoarticle12(contractprice and technical service fee)of the agreement andtheappendicestothe agreement apply to the process a unit operating at itsstateddesigncapacity. if the design capacity is in any way increased or if the processa unit is in any way operated in excess of its designcapacitythenthebuyer shall pay to the supplieradditionallicencefeescalculatedinaccordance with the following formula:(calculation formula)
4.improvements and grant-back
4.1subject to paragraph 3 above, and wheredulyauthorizedbytheprocess licensor, the supplier shall:
(1)from time to time, and to the extent that the supplier is entitledto disclosethesame,providethebuyerwithtechnicalinformationrelating to improvements in process a, whetherornotpatentable,madeavailable to the supplier by the process licensor to the extent thatsuchinformation is useful for the operation of the process a unit; and
(2)grant to the buyer a licence mentioned in (1)aboveinthesameterms as contained in paragraph 2 above.
such licence shall where permitted by the processlicensor,bemadeavailable without additionalpayment,unlessandtotheextentthatparagraph 3 above applies. the supplier's obligation under thisparagraphshall terminate on the cut-off date.
4.2the buyer shall:
(1)from time to time provide the supplier with technicalinformationrelating to any inventions, improvements and/or developments madebythebuyer in connection with thedesign,operationormaintenanceoftheprocess a unit;
(2)granttothesuppliertheroyalty-free,non-exclusive(non-transferable)right and licence to use the technical information disclosedunder paragraph 4.2 (1)in process a, and to practice any patentsgrantedin respect of any such information in process a, and to use andselltheproducts produced by process a. the saidrightsandlicencesshallbeextended to the process licensor and the licensees of the process licensorand of the supplier for use in process a. thebuyer'sobligationsunderthis paragraph shall terminate on the cut-off date.
5.patent indemnity
notwithstanding article 29 (patent indemnity)and subjecttoarticle30 (limitation of liability)of the agreement the supplier's liability forindemnification pursuant to article 29 (patent indemnity)of the agreementarising in connection with the licence hereby granted shall be limitedto_________ per cent of the paid up licence fee specified in the appendix 1(breakdown of contract price)to the agreement. thesupplier'sliabilityfor indemnification under this paragraph shall terminateonthecut-offdate.
the buyer shall be responsible for andpayanydamages,claimsordemands (including legal and otherprofessionalfeesandexpenses) inexcess of the limit specified above.
6.special conditions for termination
6.1if the contract is terminated by eitherparty,thenunlesstheparties agree otherwise, the rights and obligations of the buyerandthesupplier in respect of licences for process agrantedpursuanttothisappendix 6 shall be terminated, except thoseprovidedinparagraph6.2below.
上一页 [1] [2] [3] [4] [5] [6] [7] [8] [9] [10] [11] [12] [13] [14] [15] [16] [17] [18] [19] [20] [21] [22] [23] [24] [25] [26] [27] [28] [29] [30] [31] [32] [33] [34] [35] [36] [37] [38] [39] [40] [41] [42] [43] [44] [45] [46] [47] [48] [49] [50] [51] [52] [53] [54] [55] [56] [57] [58] [59] [60] [61] [62] [63] [64] 下一页
Tag:技术合同,技术开发合同,技术咨询合同,合同范本 - 技术合同
下一条:产品技术转让合同